Air Compressor Pump 3HP, 11.8CFM 115PSI Single Stage Twin Cylinder Air Compressor Pump, Piston Style Splash Lubrication Pump

Notes1. Before matching, you should pay attention to the air supply pressure, exhaust volume per minute, rated power, mounting aperture, header connecting pipe caliber, and the number of cylinders.2. Please note that the machine is rated pressure and can not be adjusted upward.Maintenance1. The air filter needs to be cleaned once a month, and needs to be replaced after 500 hours of work.2. Please change the oil in the crankcase after shutdown. Change the oil once in the first week of a new machine and every 500 hours (after shutdown) thereafter.3. Regularly check the parts to prevent oil and air leakage.4. Regularly check the safety valve, air release valve, pressure gauge, safety valve air hole.5. Comprehensively maintain the machine once a year by cleaning the air valve, and checking the valve discs.6. If the machine is shut down for more than one year without use, it should do anti-rust blowing treatment, and clean and check the oil level when it is activated.SpecificationColor: Silver and BlackModel: 2065Material: Aluminum and IronProcess: PaintingAssembly Required: YesMounting Type: Mounting on Air Compressor(Not Included)Matching Motor Power: 2.2KWDischarge Volume: 250L/66Gal/minRated Exhaust Pressure: 0.8mpaMaximum Pressure: 1.0mpaHorsepower: 3HPCylinder Diameter: 65mm/2.56inPulley Outer Diameter: 260mm/10.24inProduct Size: 31*26*34cm/12.2*10.24*13.39inPackage Size: 34*33.6*25.5cm/13.39*13.23*10.04 inNet Weight: 11kg/24.25 lbGross Weight: 12.32kg/27.16 lbPackage Included1* Air Compressor Pump HeadOther Accessories for Use

• Function: It can be matched with 3HP engines, with an exhaust capacity of up to 66Gal/min, rated exhaust pressure of 0.8mpa, and a maximum pressure of 1.0mpa and extended cylinder, providing you with strong support for use.
• Materials: It is made of aluminum and iron with a painting process, which is sturdy and wear-resistant, and has a long service life.
• Work Assistant: The pump head sucks in air from the outside world through a suction and discharge valve and then discharges the air into a reservoir. By continuously discharging air into the reservoir, the air is compressed in the reservoir to reach a predetermined pressure value, which is helpful for your work.
• Thoughtful Design: It adopts suction and exhaust valve design and mainframe belt design to ensure that the mainframe operates in balance, while the strong cooling fan blade provides good heat dissipation effect.
• Air Filter Muffler: It can deliver clean air to the pump with low noise.